Critical Making awarded at Bali FabFest

Critical Making awarded at Bali FabFest

By Ricardo Ruiz Comment Closed
Picture by saadcaffeine During October's first quarter, FabFest Bali gathered experts and enthusiasts at Jimbaran Hub for ten days of inspiring activities and new connections at the premier conference for people-centred digital transformation. Representing the Critical Making project, former GIG Executive Board Member Regina Sipos explained: "How Critical Makers Propose Alternative Futures". The article, built upon the research conducted by consortium partners on the Critical Making project, explores how Making can be more gender-inclusive and support education and open-source hardware projects.  The Fab Fest team has unanimously chosen the Critical Making contribution as the best paper 🥇 presented at the sessions and hosted an extended conversation of about half an hour on the FabTV prime show. You can check Regina's research paper highlight session on their YouTube channel:  (starting at minute 27 but make sure to watch the previous discussion, too!). https://youtu.be/oqi8HB2LeUo?t=1650 In the video, Peter Troxler and Cindy Kohtala asked some critical questions, which were highly favourable and encouraging. Congrats to the whole Critical Making Consortium partners and all our fantastic co-researchers! 🇪🇺 The...
Read More
Interview with Gertrude Goh from the Africa Makerspaces Network

Interview with Gertrude Goh from the Africa Makerspaces Network

By Ricardo Ruiz Comment Closed
The Africa Makerspace Network seeks to harmonize all makerspaces under one umbrella for growth and sustainable development in Africa. They achieve this by researching and contacting makerspaces in Africa, building makers' businesses, technical and entrepreneurial capacity, and enhancing prototype-to-product development and manufacturing. In this interview while in Berlin, Gertrude Gosh explains the Africa Makerspace Network and her work with Kumasi Hive in Ghana. https://youtu.be/_MhbhGWfkyo die Erstellung dieses Blogs Post  von der Stiftung Nord-Süd-Brücken mit finanzieller Unterstützung des BMZ Gefördert ...
Read More
H-Fablab – Fuelling sustainable innovative solutions in Côte d’Ivoire;  starting with young makers

H-Fablab – Fuelling sustainable innovative solutions in Côte d’Ivoire;  starting with young makers

By Mugethi Gitau Comment Closed
Dodji Honou conducting a practical training for kids at H-Fablab (all photos courtesy of H-Fablab) In the neighborhood of Bingerville about 45 minutes -1 hour from Abidjan, in the district of Angré,  stands H-FABLAB.  A digital manufacturing laboratory whose primary objective is to promote learning by doing among young people, whether or not in school, literate or not in French. The space was opened formally  in Sep 2021, but had been running informally for 2 years before that. They enjoy good internet access via a fiber connection, though electricity can be sometimes unstable Dodji Honou is  the founder of H-Fablab. His story begins in Togo, where he was born. And where his story with makerspaces  and innovation hubs began. He was a member of  Woelab now expanded into Hubcity in Togo, and in 2013 while there, his story with GIG also began. He met GIGers, Geraldine and Max , who introduced him to GIG.  He later moved on to Senegal to work with a...
Read More
Building Innovation in Nepal: Impact Hub Kathmandu

Building Innovation in Nepal: Impact Hub Kathmandu

By Mugethi Gitau Comment Closed
photo courtesy of Impact Hub Kathmandu Impact Hub Kathmandu is an open, inclusive and collaborative space designed to give social innovators, entrepreneurs and change-makers somewhere to meet, work, network and learn. They provide a friendly open space that welcomes people from all across Kathmandu, and beyond! They are part of a global network of 105+ Impact Hubs in over 60 countries, working across disciplines, acting across sectors, with amazing people putting ideas into action.  Impact Hub KTM provides business support to Nepali entrepreneurs and businesses with a social purpose. They connect, inspire and support impact entrepreneurs to scale up their projects and enterprises to address some of Nepal’s challenges,  convening changemakers to convert their passion and commitments into meaningful projects. They also have FabLab Nepal, a digital fabrication laboratory to learn, play, create, mentor, invent, and innovate. They provide access to the environment, the skills, the materials, and the advanced technology to allow anyone to make (almost) anything. Since establishment, they have worked...
Read More
A full week of mAkE encounters in Berlin

A full week of mAkE encounters in Berlin

By Mugethi Gitau Comment Closed
by Kirstin Wiedow In early June Berlin was packed with activities related to the mAkE project. Partners gathered over a week to engage in the Berlin - Africa Network Day, attend re:publica, spend a weekend networking during the GIG community weekend and finally co-designing mAkE project activities during a two-days consortium meeting. Gertrude Goh fro Africa MakerSpace Network making a presentation at the mAkE consortium meeting in Berlin What is mAkE actually and who runs it? mAkE is an EC-funded project that promotes cooperation and strategic partnerships between digital innovation hubs (DIHs) in Africa and Europe. (Click here to visit the project website) We understand makerspaces as digital innovation hubs that drive digital, local manufacturing and innovation in product design and development, learning, skills building and collaboration beyond software. They are important actors in the local digital innovation ecosystems in both Europe and Africa. A core aim of the mAkE project is to strengthen an innovation and start-up ecosystem by creating the necessary infrastructure for...
Read More

The Makerspace at re:publica 2022 was on fire!

By Fadia Elgharib Comment Closed
We are humbled by the presence of all the incredible people at our Makerspace during the three days of re:publica 2022. Whether you came by to check out the Open Hardware Exhibition, made your name light up by building paper circuits, or visited us in our co-working space, your  attendance and generous contributions made the makerspace a little more special this year. Our nineteen workshops ran as planned, with eleven remarkable Speakers/Makers arriving fresh from all across the global south to tell us about their latest discoveries and creative ways to use AI and Technology to help their communities, and tens arriving from around europe. Workshops were full with people rounded up at the makerspace table to learn about what was being shared.  Makers from Brazil, Singapore, Iraq, and India, to name a few, met with their counterparts in Europe. We are always fascinated by how Global Makers simply speak the same language. It is this mix of technical knowledge combined with...
Read More
The r0g_ way or the hard way

The r0g_ way or the hard way

By Fadia Elgharib Comment Closed
  On a sunny Monday afternoon, wandering through the streets of Charlottenburg, quietly tucked away on Knobelsdorffstrasse directly near Schloss Char  lottenburg lies r0g_agency, co-directed by longtime friends of GIG, Stephen Kovats and Susanne Bellinghausen.  “open culture” is plastered on the window in bold yellow lettering that if the sun hits it directly, it reflects perfectly over the white arched walls inside, further echoing core values of r0g_: accessibility, innovation, and peacebuilding. r0g_agency works with local grassroots organizations in the Global South to support openness within a developmental context.  As we walk through the front doors, we are warmly welcomed by our hospitable host, Stephen, and their summer intern from the University of Alberta, Lisa. Looking around, the walls are decorated with various educational materials, including a mock game board highlighting the dangers of irregular migration and the struggles migrants often face.  Currently, the list of ongoing projects is somehow interconnected and related to one another. From counteracting online incitement to violence with #defyhatenow...
Read More
Join the HerMeNow Accelerator program

Join the HerMeNow Accelerator program

By Mugethi Gitau Comment Closed
Are you a women led social enterprise in MENA or Africa? Join the HerMeNow Accelerator program to grow your social enterprise and increase your impact.  Designed for women-led social enterprises focusing on building impactful solutions in culture, mindset, and education, this 5 month program is almost entirely remote and online and so accessible to companies across MENA + Africa (including Armenia). The Accelerator will support 10 women-led social enterprises. The accelerator is hosted by Bloom, an organization co-founded by 2 of our members, Bilal Ghalib and David Munir Nabti, that helps entrepreneurs grow and build skills for thriving people, communities and planet, in collaboration with the Stardust Concept ESG and Impact Division. Eligibility Social Enterprises that are past the product/market fit stage and that: Already generate revenues or have considerable user and/or product tractionAre planning to expand their teamsAre economically viable in the long termAre responsible, inclusive, and social enterprisesAre based in MENA + Africa (including Armenia) Selected Teams Get: Funding to support an essential aspect of...
Read More
Makerspaces for sustainable development

Makerspaces for sustainable development

By Mugethi Gitau Comment Closed
Mboa Lab's Critical Making efforts in Cameroon Cameroon's MboaLab is teaching useful critical making skills with the aim of promoting women's self worth, their ability to determine their own choices and the right to influence social change for themselves and others as well as to remove gender bias through critical making . MboaLab is an open and collaborative space located in mefou-Assi village in Yaoundé, Cameroon. The aim of MboaLab is to catalyse sustainable local development and improve people’s living conditions through open science. Their approach focuses on the integration of local knowledge by centering the local community especially women. On 5th - 7th March 2022, MboaLab brought together secondary school girls, women in academia, and women in rural areas for 3 days of discovery and learning. Discovery and fabrication On Day 1, was a day of discovery where the participants were introduced to MboaLab, and had a tour where they visited the different sections of the lab with explanations about...
Read More
Gig @ re:publica’22 is here!

Gig @ re:publica’22 is here!

By Mugethi Gitau Comment Closed
GIG @ re:publica ‘22 is finally happening in-person (after 2 years of not being able to) and we couldn't be more excited! This year’s festival with the “Any way the wind blows” happens on 8-10 June, at Arena Berlin & Festsaal Kreuzberg Yay for the Makerspace! The Makerspace is happening at re:publica 2022 and as usual is bringing together some of the most brilliant makers and innovators from around the world. Curated by the GIG and with support from our membership in the Distributed Design Platform, we host full-on three days of Workshops, Meetups and Exhibitions, all happening in the Makerspace at the heart of re:publica. Whether developing robots, learning how to replace plastic bags with biodegradable materials, making your own eco-prints on DIY bio leather, or recording crawling insects by adapting programming code, our workshops program will ensure you leave with some real Hands-on knowledge. Learn more about the Workshops program here.At the comfort of the HomeBase, our Meetups will bring speakers...
Read More